+-+Copy.jpg)
HARGA 2.000.000
Kyosho Inferno GT2 Race SPEC Ceptor K Nitro 1/8
Features:
Hardened Main Chassis
Composite Chassis Stiffener
KE25 Big Block Engine
3PC Clutch Set Up
Polished Tuned Pipe And Header
Perfex KT201 2.4GHz w/ LCD Display
High Torque Metal Gear KS-200 Servos
New Shoe Type 2 Speed Transmission (IGW008)
Required
• 4 AA-size batteries for R/C system
• Glow Igniter
• R/C Fuel 20%
Specifications
• Scale: 1/8th
• Length: 515mm
• Width: 310mm
• Height: 135mm
• Wheelbase: 360mm
• Gear Ration: 1st 10.14:1 2nd 7.90:1
• Weight: 3,650
• Engine: KE25 SG
• Radio: KT-201 2.4GHz
Kyosho DBX 2.0 ReadySet 1/10th 4WD Nitro Off Road Buggy
.JPG)
.JPG)
.JPG)
HARGA 1.800.000
Kyosho DBX 2.0 ReadySet 1/10th 4WD Nitro Off Road Buggy
Specifications:
Scale: 1/10
Length: 475mm (18.7in)
Height: 154mm (6.0in)
Wheelbase: 320mm (12.5in)
Gear Ratio: 12.88:1
Weight: 2,365g (5.5lb)
Engine: GXR-18SP (Nitro)
Includes:
Factory-assembled chassis with control linkages complete
Equipped with special muffler and manifold
Finished pre-painted body
Syncro KT-200 2.4GHz / 4-channel 2-servo R/C system pre-installed
Pre-mounted GXR18SP engine fitted with recoil starter and large cooling head.
Needed to Complete:
20% RC Fuel
(8) AA-size batteries
Glow Igniter
Fuel Bottle
Glow Plug Wrench
Kyosho Desert Racing Truck (DRT) 1/10 NITRO
HARGA 1.700.000
Kyosho Desert Racing Truck (DRT) 1/10 NITRO
SPECS DRT
Scale: 1:10
Width: 257mm
Length: 489mm
Height: 170mm
Wheelbase (max):299mm
Weight: 3000g
Final Drive: 10.9:1
Slayer
Length: 22.36" (568mm)
Width: 11.65" (296mm)
Height: 8.43" (214mm)
Weight: 7.6lb (3430g)
Wheelbase: 12.7" (323mm)
Required For Operation
* AA-size batteries x 12 for R/C system, D-size batteries x 2 for plug heater and fuel are sold separately.
* R/C Fuel (20%)
* Plug Heater
* Fuel Bottle
Kyosho DMT VE 1/10 4WD Readyset Monster Truck
HARGA 2.100.000
Kyosho DMT VE 1/10 4WD Readyset Monster Truck
FEATURES:
• Equipped with large capacity oil shocks on all wheels that also provide dial adjustment of chassis height.
• Pre-cut body is complete with printed color scheme.
• Wide scope for setting adjustments includes: chassis height; camber; tread; front & rear toe-in, and shock mounting positions.
• Precision machine cut diff ring gear provides extra strength and hardness.
• Equipped with strengthened high-rigidity large size swing shafts on centre drive and all four wheels.
• Steering linkage enables wider steering angle.
• Sealed radio box features a frequency crystal hatch for easy band changes.
• Pin-spike tires with inner foam supports are secured on 6mm axles with wheel nuts.
• Equipped with the same race-proven wheels as the Inferno ST-RR.
• Compatible with after market tires such as PRO-LINE stadium truck tires.
• ESC settings can be adjusted with an optional digital setup box.
SPECIFICATIONS:
• Length: 485mm
• Width: 385mm
• Height: 212mm
• Wheelbase: 320mm
• Tread (F/R): 300mm
• Motor: Team Orion Vortex 10 Brushless
• ESC: Team Orion Vortex 10 MT
ITEMS NEEDED:
• 7.2V-8.4V NiMH or 7.4V LiPo Stick Pack Battery with Tamiya Connector
• Compatible Charger
• 8x AA Batteries for Transmitter
Kyosho DRX Demon Rally RC 4wd 1/9 Scale 2.4Ghz RTR Nitro
HARGA 1.800.000
Kyosho DRX Demon Rally RC 4wd 1/9 Scale 2.4Ghz RTR Nitro
SPECS
Length 563mm
Width 260mm
Height 187mm
Wheelbase 316mm
Tread (F/R) 215mm / 215mm
Tire(F/R) Φ93×38mm / Φ93×38mm
Gear Ratio 8.86：1
Weight 2,600g (approx.)
Engine GXR-18 engine fitted with recoil starter
Required for operation:
AA-size batteries x 8 for R/C system, D-size batteries x 2 for plug heater and fuel are sold separately.
R/C Fuel (20%)
Glow Plug Heater
Fuel Bottle
Kyosho EP Fazer Kobra 1/10 4WD RTR Buggy
HARGA 1.800.000
Kyosho EP Fazer Kobra 1/10 4WD RTR Buggy
FEATURES
• All wheels are equipped with a newly designed micro - block pattern tires to produce a steady grip on off-road surfaces .
• Sealed differential and transmission provide reliability for rough road racing performance .
• Fixed length suspension links eliminate the need for camber , caster and toe -in ( front ) adjustments .
• print aero body and large wing produce superior aerodynamic stability .
• New motor mount with easy gear mesh adjustment feature allows adjustments to be made with only 2 screws .
• A combination of different motors , tires and other optional parts can be installed to customize and improve driving performance .
• KYOSHO the many years of expertise in the outcome of the shaft -driven 4WD design in a low center of gravity chassis that demonstrate outstanding performance and reliability .
• Full bearing specifications [High - efficiency drive train uses a total of 17 ball bearings .
• G27 MOTOR [ User-friendly G27 540 size motor delivers high power over a long time period .
SPECIFICATIONS
• Length 365mm
• Width 248mm
• Height 121mm
• Wheelbase 272mm
• Tread ( F R ) 213mm206mm
• Gear Ratio 8241
• Weight 1680g
• Type 27T 540 motors ( G27 )
• Transmitter Syncro KT - 200 2.4GHz
ITEMS NEEDED
• 8x AA Batteries
• 6 - Cell 7.2V NiMH Stick Pack with Tamiya Connector
• Suitable for choosing a battery charger .
Kyosho Inferno GT2 Audi A4 DTM On-Road Nitro Car 1:8
Kyosho Inferno GT2 Audi A4 DTM On-Road Nitro Car 1:8
Features:
Fully assembled ReadySet package
Fully licenced scale Audi A4 DTM in Red Bull livery
Steerwheel RC system installed
High torque servos
Kyosho GXR-28SG pullstart engine w/SG shaft
Machined alloy cylinder head
Industry standard engine mounts
Smaller flywheel and up-graded clutch bell bearings
Two-speed transmission with updated high-speed gears
Long wheelbase chassis
150cc fuel tank
Double A-Arm suspension
Double steel disc brakes
Shaft drive 4WD system
Composite threaded oil shocks
Stronger shock springs and heavier damping
Turnbuckle linkages
Front chassis brace included
Specifications: (Corvette C6R)
Length: 20.28 in. (515mm)
Width: 12.2 in. (310mm)
Height: 5.31 in. (135mm)
Wheelbase: 14.17 in. (360mm)
Tread (F/R): 10.31/10.43 in. (262/265mm)
Tire size: 3.82×1.89 in. (97x48mm)
Gear Ratio: 10.14:1/6.3:1 (1st/2nd)
Weight: approx. 8 lbs. 1 oz. (3650g)
Engine: GXR28SG
Manufacturer: Kyosho
Assembly Type:Assembled (RTR)
Drive:4WD
Scale:1:8
Vehicle:GT Racer
Surface Type:On-Road
Kyosho INFERNO NEO Buggy 1:8 ready to run
HARGA 2.100.000
Kyosho INFERNO NEO Buggy 1:8 ready to run
Features
Strong 3.5mm Big Bore Shocks deliver smooth and effective damping for sure-footed performance on a wide range of surfaces.
Micro-square pattern tyres are pre-mounted giving you full traction.
Pre-painted body that efficiently channels airflow for greatest aerodynamics.
Hard anodised main chassis, upper and front upper chassis plates and the engine head are anodised in black for added strength and surface hardness giving all your components a longer lifespan.
GX21BK Big Block Engine with a recoil starter and a tuned muffler. The black anodised cylinder head features a new design that dissipates heat more quickly for cool, consistent performance.
The suspension and steering linkages feature turnbuckles, which allows for quick adjustments to the camber and steering toe angles.
Full ball bearings throughout for maximum efficiency through the drive system.
Tough Buggy factory-assembled chassis share the same tough characteristics and low centre of gravity as the World Championship winning Inferno 7.5
Hand welded manifold and tuned muffler.
Shaft driven 4WD chassis with three differentials.
2 piece clutch realises efficient power transfer and full adjustability by changing your springs (spring rate) you can control all aspects of your clutch.
2.4GHz Syncro System - The all new Kyosho 2.4GHz transmitter, ultimate safety and function included with all Inferno NEO 2.4GHz Ready Sets.
125cc fuel tank delivers long run times for even more dirt action.
Specification:
Scale - 1/8
Colour - Blue
Length - 469mm (18.4")
Width - 307mm (12")
Height - 189mm (7.4")
Wheelbase - 325.5 (12.8")
Weight - 3.400g
Gear Ratio - 11.704:1
Engine - GX21BK
Complete :
R/C nitro fuel
12AA batteries
Fuel bottle
Glow igniter & charger
Kyosho Inferno NEO Race Spec 2.4GHz Scale 1:8
HARGA 2.000.000
Kyosho Inferno NEO Race Spec 2.4GHz Scale 1:8
Characteristics:
Shaft-driven 4WD chassis with three differentials
Front and rear stabilizers
Equipped with an easy-start high-power KE25 engine with pull starter
Front and rear differentials use machined, hardened steel spiral ring and pinion gears
Aluminum clutch shoes
Hardened clutch bell and spur gear
Set the end-points etc with the multifunctional KT201 2.4Ghz digital transmitter with LCD display, end-point adjustment, digital sub-trim and more
Body comes complete with unique colour scheme
Factory-assembled chassis shares the same tough characteristics and low center of gravity as the World Championship winning Inferno 777
Includes hand-welded manifold and tuned muffler
Full ball bearings throughout for maximum efficiency through the drive system
Compatible with many INFERNO 7.5 standard and option parts
Technical Specifications:
Length: 496mm
Width: 307mm
Height: 189mm
Wheelbase: 328mm
Ground Clearance: 28mm
Tires: 116x42mm
Engine / Motor: Kyosho KE25
Weight: 3400g
Manufacturer: Kyosho
Part Number: 31682
Engine Size: 4.0cc (.25ci)
Engine Start Type: Pullstart
Scale: 1:8
Drive: 4WD
Surface Type: Off-Road
Assembly Type: Assembled (RTR)
Vehicle: Buggy
KYOSHO Inferno NEO ST RACE SPEC Mesin 1:8 Nitro Truggy
HARGA 2.000.000
KYOSHO INFERNO NEO ST RACE SPEC Engine Nitro Truggy 1:8
specifications:
Length: 550mm (21.6 ")
Width: 427mm (16.8 ")
Height: 225mm (8.8 ")
Wheelbase: 355mm (13.9 ")
Gear Ratio: 13.76:1
Weight: 3,750 g
Engine: KE25 Nitro (w / pull start)
including:
Factory assembled chassis with pre-adjusted relationship
Special manifold and muffler
Pre-painted with stickers pre-attached on completed body
Pre-Installed PERFEX KT-201/4-ch 2-servo (KS-102BK servo specification.)
Pre-installed KE.25 engine with recoil starter
Cross Wrench
hex wrench
REQUEST:
R / C Fuel 20%
8 AA size batteries for R / C system
Fuel bottle & Cross key
glow ignitor
fuel Bottle
HARGA 2.000.000
Kyosho Inferno U.S. Sports 2 1:8 Scale Buggy RTR
Features :
Fully assembled package ReadySet
New pre-painted bodyshell design with unique color scheme
PERFEX KT - 14 Digital steerwheel RC with LCD display
High torque servos
Kyosho Pullstart GSX - 28SG engine with new grip handle for pulling Easier
Hand -welded manifold and tuned muffler
New conventional type engine mounts
High performance Teflon clutch shoes
Hardened clutch bell and spur gear
Machined , hardened steel spiral ring and pinion gears F & R diff
Full transmission ball race bearings
Blue anodised 17mm hex hubs
Double A - Arm suspension
Front and rear torque rods
Adjustable turnbuckles
SPECS :
Manufacturer : Kyosho
Part Number: 31277SG - B
Engine Size : 4.6cc ( .28 ci )
Start Engine Type : Pullstart
Scale : 1:8
Drive : 4WD
Surface Type : Off - Road
Assembly Type : Assembled ( RTR )
Vehicle : Buggy
IN THE BOX :
Pre -installed R / C unit
Factory assembled chassis
Pre - colored body
Pistol - grip transmitter type ( computerized R / C system)
request :
fuel bottle
plug heater
Cross wrench
AA - sized alkaline batteries x 12 for R / C system
D - size alkaline batteries x 2 for plug heater
Kyosho Mad Force Kruiser 4WD 1:8 Monster
HARGA 2.000.000
Kyosho Mad Force Kruiser 4WD 1:8 Monster
Features :
Fully pre -assembled package Readyset
Pre - cut and painted hot - rod truck body , finished with decals applied
PERFEX KT - 6 steerwheel RC system
Kyosho GX - 21 engine with new heatsink Pullstart head
Aluminum tuned exhaust and manifolds
Equipped with a 3-speed auto transmission that makes full use of the engines power
Shaft and chain 4WD mechanism realizes highly efficient power transfer
Heavy duty black anodized chassis side plates
Heavy duty big bore oil shocks with threaded bodies
Solid casings on the front and rear rigid axles provide effective traction transfer
New 2 -piece clutch realizes efficient power transfer
150cc fuel tank delivers long run times
New knuckle design increases control angles
Features 19mm hex hubs ( 14mm hex hubs can also be used )
Tough steel bevel gears included in rear differential
Total of 22 ball bearings used throughout the drive train for full- bearing specifications
Receiver box effectively Protects R / C system from dust and dirt
Features huge rubber pneumatic tires unidirectional
Length: 545mm
Width : 415mm
Height : 245mm
Ground Clearance : 50mm
Wheelbase : 360mm
specification
Gear ratio : 25.7 / 19.8 / 15,6:1 , axial ratio : 3.31:1 ;
Model RTR type
1:8 scale
Engine displacement 4.1 cm ³
KE engine type - 25
4WD
Max speed 70 km / h
Chassis Mad Force
Keep track width of 310 mm
Tire width 110 mm
Tire diameter 160 mm
Wheelbase 360 mm
System remote control KT - 200
Frequency 2.4 GHz
Weight 4100 g
